Alula’s new product introduction of the CAM-OD-HS2-A1 expands line of DIY security cameras.
GeoArm has released the brand new Alula outdoor bullet smart security camera (part number: CAM-OD-HS2-A1) with two-way audio to the do-it-yourself business and home security markets. The Alula outdoor camera features full 1080P HD video, motion detection and 90 feet of night vision.
It also provides real-time viewing and recorded clips via the Alula app. Using the app, you can set up notifications that will alert you when suspicious motion activity is detected. It can be used as a stand alone video surveillance system or as part of a more holistic security and automation system when paired with Alula’s Connect+ security system or BAT-Connect communicator.
This product replaces the previous generation outdoor bullet camera, RE701.
The Resideo LYNX Plus L3000 and LYNX Touch L7000 panels are being discontinued.
At GeoArm, we have just received notice from Resideo Pro (formerly “Honeywell Home”) that the older LYNX Plus L3000 and LYNX Touch L7000 wireless control panels are being discontinued from new sales as of April 18, 2022(or while supplies last).
More recently, Resideo has released the all-new ProSeries platform, with two self-contained offerings, the PROA7 and PROA7PLUS, along with the SiX sensor portfolio and LTE communicators. This ProSeries platform will act as the replacement moving forward.
Customers who still have a L3000 or L7000 panel have the full protection of the Resideo warranty.
The AlarmNet network experienced a brief 12 hours of downtime between 3/13/22 to 3/14/22.
Resideo’s AlarmNet and Total Connect 2.0 interactive app services experienced a global outage on 3/13/22 starting at approximately 9 PM ET.
Some conspiracy theorists out there thought it was a ransomware attack. Well it turns out that you can now take a deep breath, as Resideo strongly denied those claims. It seems the reason for the outage is quite embarrassingly simple, it had to do with their environmental system.
Total Connect 2.0 has now been fully restored within about 12 hours or so of it initially going down. GeoArm has confirmed at approximately 2:30 PM ET (on 3/14/22) that both Apple iOS and Android devices are now able to successfully connect again. Resideo has confirmed that Total Connect 2.0 is restored as well.
For most GeoArm customers, you do not need to do anything at all. However, we have found upon restoral for some panels, such as the LYNX Touch WiFi that they are not successfully reconnecting. If applicable, in most cases all you have to do is reboot the panel. If this does not work than go back through the WiFi settings and rejoin your network.
We are excited to announce the brand new Alarm.com Pro Series bullet/turret and dome cameras are available on GeoArm. Help customers monitor their businesses any time, from anywhere with Alarm.com’s best-in-class PoE cameras.
The ProSeries security cameras are designed for indoor/outdoor use and a wide range of commercial applications via the Alarm.com video monitoring app.
Product Features:
Supports Business Activity Analytics
Onboard & SVR Recording with 24/7 footage playback and encrypted storage
HDR video for enhanced image clarity and detail (4MP and 1080p options)
Motorized varifocal lens options for greater install flexibility
Compliant with Section 889 of the NDAA
The Alarm.com Pro Series business security cameras come in 4 new models:
GeoArm has released the Alula BAT-FIRE universal dual-path commercial fire communicator.
GeoArm has just released the all new Alula BAT-FIRE universal dual-path IP/cellular commercial fire alarm communicators in both the AT&T and Verizon 5G LTE-M models to the DIY business security market.
The Alula BAT-FIRE-ATT and BAT-FIRE-VZ are universal dual-path internet/cellular AT&T/Verizon 5G LTE-M commercial fire alarm communicator(s). The BAT-FIRE communicator connects to an intrusion or fire alarm control panel (FACP) and provides central station alarm reporting.
The BAT-FIRE can be configured to provide dual-path connectivity using Ethernet/broadband and cell or single-path connectivity using either Ethernet/broadband or cell to Bosch Conettix D6100IPv6 receivers at the central station. The BAT-FIRE allows system integrators to save money, maximize install flexibility and skip the 4G cellular sunset.
It provides two PSTN interfaces for the FACP/burg panel’s DACT phone line connections. The BAT-Fire’s DACT phone interface connection provides phone line voltage, dial tone, ringback tone and all required CID protocol signaling. The BAT-FIRE receives CID events from the FACP/burg panel’s DACT and then relays the CID events to the GeoArm central station receiver.
The BAT-FIRE-ATT provides inputs that can be used to monitor an FACP’s alarm, AC fail, and trouble points (dry contact outputs). In this topology BAT-Fire inputs will be connected to the FACP points (dry contact outputs). The communicator will continually monitor the state of the FACP points (dry contact outputs). A state change on a BAT-FIRE-ATT monitored FACP point (dry contact output) will be reported to the GeoArm central station.
Product Features:
Supports 12V and 24V regulated FACPs/burg panels
Alarm capture via phone line interface or standard FACP/burg panel points
Supports Contact ID (CID) reporting format
Dual Path: Ethernet (primary) with Cellular AT&T/Verizon 5G LTE-M (backup)
Sole Path: Ethernet or Cellular AT&T 5G LTE-M
Platform visibility through AlulaConnect™
Trouble event detection and reporting
Four programmable input/output ports
At-a-glance system status via front-panel LEDs
UL 864 10th edition commercial fire certification
ULC-S559 commercial fire certification
UL 1610 commercial burg certification
ULC-S304 commercial burg certification (Security Level II installations)
Remote programming, troubleshooting and managed over-the-air firmware upgrades
GeoArm and Resideo Partner with CellBounce for AT&T 3G-to-LTE Customer Conversions.
GeoArm and Resideo have partnered with CellBounce to help address the AT&T 3G Sunset on 2/22/2022. The security industry is facing a major challenge: As cellular carriers begin to retire their 3G networks, existing AT&T 3G GSM Communicators will no longer be able to connect to a carrier network. CellBounce has developed technology, specifically designed to keep Resideo AlarmNet 3G GSM devices connected beyond the current 3G sunset of 2/22/22.
The CellBounce (model number: CB34UDRES01A) provides a seamless AT&T 3G GSM to LTE connection between an existing Resideo AT&T 3G GSM Communicator and AT&T LTE network. CellBounce is simple to activate and can be installed easily by the end-user by plugging it into an electrical outlet within 25 feet of their current communicator. CellBounce eliminates the need for a truck roll / technician to visit each site to upgrade or modify the existing device. When installed CellBounce establishes a conversion of the existing Resideo AT&T 3G GSM Communicator signals on the new LTE service. Service functionality of the AT&T network is maintained with the CellBounce unit.
Product Features:
Plug-and-play 3G to LTE conversion
Keep AT&T 3G devices connected past the sunset
Designed for quick and easy end-user installation
Easy provisioning via AlarmNet 360™
No truck roll needed
Doesn’t require technicians entering homes and business
Releasing the all-new Qolsys IQ Panel 4 touchscreen alarm controller with built-in Alarm.com cellular LTE radio, Bluetooth, Front Camera, PowerG, Wi-Fi and Z-Wave Plus wireless receivers by Johnson Controls International (aka “Tyco”).
GeoArm, a pioneer in the DIY security market, has released the much anticipated Qolsys IQ Panel 4 wireless touchscreen alarm controller. This all-new control panel can be remotely controlled by the end user via the Alarm.com app, which integrates smart automation and video surveillance, for a highly customized small business and home security solution.
An elegant 7″ HD touchscreen is the focal point for the IQ Panel 4 that contains an upgraded 8-megapixel front loaded camera, with a 120° wide-angle lens, that makes use of Flex-Tilt to adjust the camera angle for peek in and alarm videos. “We are excited to be one of the first DIY alarm companies to offer the next generation of the IQ Panel in North America,” says Joe Rosenthal, President of GeoArm. Some other noteworthy IQ Panel 4 product features include; Bluetooth disarming, a built-in glass break detector, photo frame, live view/answer, and disarm photos/videos functionality.
With an improved range on every wireless radio, the IQ Panel 4 incorporates not only a Z-Wave Plus 700-Series and PowerG encrypted receiver, but also comes with either a 319.5 MHz, 345 MHz or 433 MHz legacy receiver. By having backwards legacy frequency compatibility, the user is able to salvage and re-use existing 2GIG, DSC, Honeywell Home or GE Interlogix wireless alarm sensors. “DIYers can swap out their older panel, use existing wireless sensors, and seamlessly make the upgrade to the smarter IQ4 security platform in minutes,” says Rafael Alvarez, Technology Manager of GeoArm. Much like its predecessor the IQ Panel 2 Plus, which was launched in 2018, the IQ Panel 4 has evolved into a simple do-it-yourself installation that does not require a professional.
The IQ Panel 4 is much more than just security, it is a complete smart alarm system running the fastest 8-core Qualcomm IoT processor yet. The all-in-one panel comes equipped with a fully redundant dual-path Alarm.com communicator, that is designed to send signals over Wi-Fi and/or cellular AT&T/Telus/Verizon LTE radio networks. For remote monitoring of the home or business, the IQ Panel 4 blends with the Alarm.com interactive app to offer all of its award-winning services throughout the United States and Canada.
QuadSound speakers are built into every panel for the purpose of delivering the best in audio. Better yet, user’s can also connect the panel to the IQ Base table stand subwoofer to enhance the music streaming over Bluetooth experience. By focusing on adding the most cutting-edge IoT solutions available, Qolsys and its newly manufactured IQ Panel 4 differentiates itself as the premium smart security system in 2022 and beyond.
The Alarm.com ADC-V724 is a outdoor, 1080p high definition, wifi security camera with two-way audio that is designed specifically to work with the Alarm.com video service has been released by GeoArm!
The ADC-V724 outdoor security camera allows for proactive deterrence of unwanted activity on a customer’s property. With powerful video analytics from Alarm.com, the ADC-V724 can detect and alert customers to people and animals active around their homes or businesses. Additionally, the ADC-V724 comes with two-way audio giving DIY customers the power to discourage unwanted visitors. Plus, thanks to onboard recording with smart view the end user can locally record encrypted video onto a microSD (sold separately) and view footage from anywhere.
Product Features:
Two-Way Audio to hear and speak with visitors
1080p HD video surveillance
117° field of view
Microphone and speaker
Video Analytics for smarter detection and alerts
Onboard Recording with Smart View for continuous, local, encrypted recordings
High Dynamic Range (HDR)
IR night vision
IP66
Audio included in recorded clips for additional awareness
Improved mount for long-term stability
Easier access to microSD card door
Works with the Alarm.com Customer Website and Customer app
We hope this finds you, your families, and employees, safe and well. During these unusual and difficult times, we want you to know that GeoArm is continuing to serve you at full strength.
Our Monitoring Center will continue to operate without interruption 24/7. As an emergency response company, we are prepared for disasters. To date, our dedicated employees continue to fill orders and provide support services from our general offices. It is business as usual for our purchasing, billing, accounts receivable, and shipping departments.
In the event it should become necessary for our employees to telework from their homes for their safety, our company will continue to be available to service your needs. All employees have computer access to our business network and remote cell phone connectivity to our phone system in order to provide the services you expect. Although it would be the first time since our inception in 2008 to operate remotely, we are confident that we are equipped and ready to perform seamlessly for you.
Our call answer time may be slower than normal due to an increased volume, so let me thank you in advance for your patience. In order to ensure that your call is answered, we have extended our published business hours. Naturally, we are hoping that our need to work remotely does not occur, but if it does, we want you to have peace of mind that we are here to serve you. We wish you and your families, and employees, good health through the COVID-19 pandemic, and a quick rebound moving forward.
