Resideo Adds 5800SMOKEV Smoke/Heat and Rate-of-Rise Temperature Detector

The 5800SMOKEV is compatible with Resideo LYNX, Lyric, ProSeries or other 345 MHz panel.

Introducing the all-new Resideo 5800SMOKEV which is a 3V lithium-powered, photoelectric multi-criteria detector that has a built-in wireless transmitter capable of detecting smoke, heat, rate-of-rise and low temperature.

DIY friendly alarm companies, such as GeoArm, make it simple for the end user to add 5800SMOKEV detectors to any compatible security system, which supports 5800-Series sensors. The following control panels (e.g. VISTA®, LYNX, Lyric®, ProSeries, Qolsys IQ Panel 4, Qolsys IQ4 Hub) can accept 345 MHz wireless RF frequency sensors, including the 5800SMOKEV sensor.

The 5800SMOKEV meets UL 268 7th Edition requirements, which provides early detection, while also reducing nuisance alarms from everyday cooking. The 5800SMOKEV has improved detection of smoke from common synthetic materials found in many modern home furnishings, which typically burn faster and hotter.

This comprehensive detector is particularly ideal for hard-to-wire locations or where hazardous materials exist, and features a small, sleek design for locations where aesthetics are of utmost importance. The built-in sounder provides clear, audible annunciation during potential incidents and low battery conditions.

This photoelectric 3V lithium battery-powered detector protects against smoke, heat and more!

Product Features:

  • Minimize Nuisance Alarms: Mathematical calculations smooth out short term spikes from dust/smoke and drift compensation adjusts the detector’s sensitivity to minimize false alarms
  • Easy to Install: Sturdy, versatile mounting base and quick battery pull tabs allows for hassle-free installations
  • LED Status Indicators: Easily visible LEDs indicate power, sensor trouble, alarm and low battery status
  • Supports High/Low Maintenance: Monitors the smoke chamber and alerts when maintenance is needed
  • Quickly Check Unit Functionality: Easily accessible test button to check unit functionality
  • Residential and Commercial Applications: Meets both residential and commercial installation requirements
  • Smoke Detection: Alarms when smoke is detected
  • Heat Detection: Alarms when detected temperature is 135°F (57°C) or greater
  • Rate-of-Rise: Alarms when temperature is >104°F (40°C) @ 15°F/minute (8.33°C/minute)
  • Low Temperature Sensing: Senses ambient temperature and reports if temperature drops below 41°F (5°C)
  • Tamper Mode: Activates when the detector is removed from the mounting base or the tamper switch is closed and opened
  • Supervision: The detector will transmits its status every 60 to 70 minutes

Honeywell’s HW-AV-LTE-M CLSS Pathway Commercial Fire Alarm Communicator

The Honeywell HW-AV-LTE-M dual-path commercial fire alarm communicator is now available.

The Honeywell HW-AV-LTE-M Connected Life Safety Services (CLSS) Dual-Path LTE Communicator with dial-capture interface for commercial building fire alarm monitoring has been released on GeoArm.

The HW-AV-LTE-M is a commercial fire dual-path (internet and cellular multi-band AT&T/Verizon LTE) alarm communicator designed for universally compatible fire alarm panels. The CLSS Pathway combines dial capture functionality with the powerful capabilities of Honeywell’s CLSS Cloud. It represents the latest alarm communications technology for the fire industry. The CLSS Pathway allows data transmission by utilizing LTE CAT-M1 networks, serving as a bridge between the fire system and the CLSS Cloud. This device provides a single site-to-cloud path ensuring all CLSS Cloud services use the same audited and monitored method to access the on-premises life safety system.

The CLSS Pathway is commissioned via the CLSS mobile app and CLSS Site Manager interface, which also allow for additional remote visibility. Connection and mounting is simplified using the enclosure kit. The CLSS Pathway is compatible with any fire alarm dialer using Contact ID format and automatically recognizes the format when powered up. Any number can be programmed into the panel phone numbers. Installers can select the central station service they wish to use from a list of approved central station providers.

Equipped with dual SIM cards, the CLSS Pathway supports both AT&T and Verizon networks. When first powered on, the communicator selects the strongest signal. If either path is not available, the device provides redundant paths for the cellular signal. The HW-AV-LTE-M dual-path communicator transmits signals to the AlarmNet Control Center (via the internet or AT&T/Verizon cellular LTE network), which in turn routes signals to the GeoArm central station. If the Internet and AT&T or Verizon LTE networks are all unavailable (fail), the message will not be sent using this HW-AV-LTE-M communicator.

Honeywell CLSS is an innovative, all-in-one cloud platform that enables systems integrators and facilities managers to deliver an enhanced fire safety service, while maximizing the performance efficiencies offered by Honeywell’s trusted detection and alarm systems.

The CLSS platform enables users to;

  • Universal Panel Compatibility – Dial capture interface supporting Contact ID
  • Get a “bird’s eye” view of all accounts
  • Obtain real-time information on event generation, enabling diagnosis before dispatch
  • Conduct tests and inspections using a mobile app (available in select markets)
  • Provide end users with multi-site asset information and event alerts
  • Integration with CLSS enables monitoring of event transmission data & management of device inventory from the CLSS mobile app and web portal (available only when using point-based reporting)
  • Meets UL 864 requirements for sole primary or backup path communications
  • High reliability due to multiple transmission channels (LTE CAT-M1/LAN) and redundant servers
  • Four supervised inputs for non-dialer panels
  • Unique “M1” Network is 5G ready, providing deep signal penetration that allows operation within buildings
  • Remote firmware updates
  • CLSS mobile app supports push and email notifications
  • Monitors event transmission data & manages device inventory from the CLSS mobile app and web portal
  • Exceptional Redundancy – Dual-SIM device picks the strongest signal from AT&T or Verizon. If one network becomes unavailable, the communicator connects to the other network
  • Powered directly by a 24-volt DC fire alarm power supply. No need for additional batteries, transformer, or power supply
  • Connection monitoring – adjustable fault reporting time as low as 20 seconds
  • Web-based software and smartphone app for device configuration and administration

GeoArm adds the Alula BAT-FIRE Universal Fire Alarm Communicator

GeoArm has released the Alula BAT-FIRE universal dual-path commercial fire communicator.

GeoArm has just released the all new Alula BAT-FIRE universal dual-path IP/cellular commercial fire alarm communicators in both the AT&T and Verizon 5G LTE-M models to the DIY business security market.

The Alula BAT-FIRE-ATT and BAT-FIRE-VZ are universal dual-path internet/cellular AT&T/Verizon 5G LTE-M commercial fire alarm communicator(s). The BAT-FIRE communicator connects to an intrusion or fire alarm control panel (FACP) and provides central station alarm reporting.

The BAT-FIRE can be configured to provide dual-path connectivity using Ethernet/broadband and cell or single-path connectivity using either Ethernet/broadband or cell to Bosch Conettix D6100IPv6 receivers at the central station. The BAT-FIRE allows system integrators to save money, maximize install flexibility and skip the 4G cellular sunset.

It provides two PSTN interfaces for the FACP/burg panel’s DACT phone line connections. The BAT-Fire’s DACT phone interface connection provides phone line voltage, dial tone, ringback tone and all required CID protocol signaling. The BAT-FIRE receives CID events from the FACP/burg panel’s DACT and then relays the CID events to the GeoArm central station receiver.

The BAT-FIRE-ATT provides inputs that can be used to monitor an FACP’s alarm, AC fail, and trouble points (dry contact outputs). In this topology BAT-Fire inputs will be connected to the FACP points (dry contact outputs). The communicator will continually monitor the state of the FACP points (dry contact outputs). A state change on a BAT-FIRE-ATT monitored FACP point (dry contact output) will be reported to the GeoArm central station.

Product Features:

  • Supports 12V and 24V regulated FACPs/burg panels
  • Alarm capture via phone line interface or standard FACP/burg panel points
  • Supports Contact ID (CID) reporting format
  • Dual Path: Ethernet (primary) with Cellular AT&T/Verizon 5G LTE-M (backup)
  • Sole Path: Ethernet or Cellular AT&T 5G LTE-M
  • Platform visibility through AlulaConnect™
  • Trouble event detection and reporting
  • Four programmable input/output ports
  • At-a-glance system status via front-panel LEDs
  • UL 864 10th edition commercial fire certification
  • ULC-S559 commercial fire certification
  • UL 1610 commercial burg certification
  • ULC-S304 commercial burg certification (Security Level II installations)
  • Remote programming, troubleshooting and managed over-the-air firmware upgrades
  • 5-year warranty

Order Now – https://www.geoarm.com/alula-commercial-fire-alarm-communicators.html