The Verizon® CDMA Network will be shut down permanently starting December 31st, 2022.
This will be a nationwide event which should be completed within the first week of 2023. Customers with Verizon CDMA communicators may begin to see communication failures and panel keypad faults as early as 11/21/22.
If applicable, please order a new compatible replacement LTE alarm communicator today to avoid any disruption in your alarm monitoring services.
Introducing the all-new Resideo 5800SMOKEV which is a 3V lithium-powered, photoelectric multi-criteria detector that has a built-in wireless transmitter capable of detecting smoke, heat, rate-of-rise and low temperature.
DIY friendly alarm companies, such as GeoArm, make it simple for the end user to add 5800SMOKEV detectors to any compatible security system, which supports 5800-Series sensors. The following control panels (e.g. VISTA®, LYNX, Lyric®, ProSeries, Qolsys IQ Panel 4, Qolsys IQ4 Hub) can accept 345 MHz wireless RF frequency sensors, including the 5800SMOKEV sensor.
5800SMOKEV meets UL 268 7th Edition requirements, which provides early
detection, while also reducing nuisance alarms from everyday cooking. The
5800SMOKEV has improved detection of smoke from common synthetic materials
found in many modern home furnishings, which typically burn faster and hotter.
This comprehensive detector is particularly ideal for hard-to-wire locations or where hazardous materials exist, and features a small, sleek design for locations where aesthetics are of utmost importance. The built-in sounder provides clear, audible annunciation during potential incidents and low battery conditions.
Minimize Nuisance Alarms: Mathematical calculations smooth out short term spikes from dust/smoke and drift compensation adjusts the detector’s sensitivity to minimize false alarms
Easy to Install: Sturdy, versatile mounting base and quick battery pull tabs allows for hassle-free installations
LED Status Indicators: Easily visible LEDs indicate power, sensor trouble, alarm and low battery status
Supports High/Low Maintenance: Monitors the smoke chamber and alerts when maintenance is needed
Quickly Check Unit Functionality: Easily accessible test button to check unit functionality
Residential and Commercial Applications: Meets both residential and commercial installation requirements
Smoke Detection: Alarms when smoke is detected
Heat Detection: Alarms when detected temperature is 135°F (57°C) or greater
Rate-of-Rise: Alarms when temperature is >104°F (40°C) @ 15°F/minute (8.33°C/minute)
Low Temperature Sensing: Senses ambient temperature and reports if temperature drops below 41°F (5°C)
Tamper Mode: Activates when the detector is removed from the mounting base or the tamper switch is closed and opened
Supervision: The detector will transmits its status every 60 to 70 minutes
The Qolsys IQ4 Hub (from Johnson Controls) all-in-one wireless 7″ touchscreen smart security system with automation has been released to the DIY security marketplace. The affordable IQ4 Hub contains a built-in Alarm.com dual-path wifi/cellular Verizon LTE communicator and either a S-Line/legacy 319.5 MHz wireless receiver, legacy 345 MHz, legacy 433 MHz or PowerG receiver and all the bells and whistles.
The IQ4 Hub also includes other key features such as; Bluetooth, Z-Wave 800-Series automation module, smash and grab reporting. It features a SmartMount system, all internal antennas and an easy on-screen installation wizard. With a built-in front speaker the IQ4 Hub allows for 85dB piezo audible siren to alert nearby individuals of an alarm initiating event. It has a dual panel and wall tamper with spring release and smash and grab reporting. Additionally, the panel has a single wake/sleep button for added user convenience.
The touchscreen panel also includes Live View which is the ability to view Alarm.com video cameras on the screen, and Live Answer. Live Answer give the user the ability to answer their Alarm.com video doorbell from the IQ4 Hub inside the property, such as the Alarm.com ADC-VDB770 touchless video doorbell. Live Answer will also work with Live View cameras that have voice capability, such as the Alarm.com ADC-V515 indoor security camera. With Alarm.com’s video monitoring solutions in place you can view and respond through the interactive app, and you can also see who is at the front door by just looking at the IQ4 Hub touchscreen.
The IQ4 Hub leverages the power of it’s Android 9 operating system with a QualComm Snapdragon 8 core SOM (System on a Module) processor having 16GB NAND Flash internal memory. The IQ4 Hub has an aesthetically pleasing and elegant modern user interface that keeps you connected to an entire ecosystem of smart devices, giving you complete control over your entire apartment, home or small business.
Johnson Control’s Qolsys IQ WiFi 6 (Part Number: IQWF6) mesh router solution for homes and businesses with security, automation and Wi-Fi devices has been released to the do-it-yourself market.
The IQ WiFi 6 is a Wi-Fi Alliance Certified router with Alarm.com management software built in, delivering improved end-to-end user experience and reduced dealer maintenance, support calls and truck rolls.The Qolsys IQWF6 is a mesh capable router that covers every corner of every room with safe, seamless WiFi up to 1,500 square feet per point. The IQ WiFi 6 router is used to connect Qolsys-compatible WiFi devices such as; Alarm.com security cameras, Alarm.com video doorbells and the Qolsys touchscreen keypad inside a home or business to the Qolsys IQ Panel security system.
When paired with the Qolsys IQ Panel, the IQ WiFi 6 delivers 3 unique network/SSIDs: one for the end user’s personal or business devices, an easy-to-join guest network, and a dedicated security network for the dealer’s installed devices such as cameras, doorbells, and garage openers. These networks can be managed and maintained by end users and service providers through the panel’s 7″ touchscreen, iOS and Android mobile apps, and the Alarm.com website and Partner Portal.
IQ WiFi 6 leverages The Qualcomm® Networking Pro 400, a highly flexible Wi-Fi 6 platform designed to meet the growing demands of crowded WiFi environments.
Self optimizing WiFi mesh with wired and wireless ethernet backhaul
The all-new Alarm.com Smart Thermostat HD with color touchscreen display has been released to the DIY security market at GeoArm.
The Alarm.com ADC-T40K-HD is an aesthetically pleasing smart thermostat that offers a sleek, color touchscreen display for an engaging customer experience that delivers the next-level of comfort and control. With mechanical wire detection, an easy setup wizard, and local configuration, the Smart Thermostat HD makes installation a breeze. The Smart Thermostat HD can also monitor the health of the heating and cooling system, deliver monthly performance reports, and even alert you to potential HVAC issues right on its display.
When installing, please keep in mind that the Smart Thermostat HD requires 24 VAC power. There is no option for a battery-powered mode. Power is supplied via a common wire, typically identified as C. Mount on an inside wall, approximately 5 ft. (1.5 m) above the floor in a frequently used room. Avoid areas that are exposed to large temperature variances, such as: direct sunlight, near an AC unit, above or below auxiliary heat and air vents, and drafts from windows or exterior doors.
Easy to use setup wizard
Z-Wave SmartStart and S2 compatible
Full integration with the Alarm.com platform – Scenes, energy-saving schedules, and geo-fences
Optional local scheduling – install in a vacant home prior to account creation
The Brilliant Resideo BHA120USWH all-in-one smart home control panel have just been released for sale at GeoArm.
When adding the Brilliant Control Hub it instantaneously transforms any property, especially those with a Total Connect 2.0 security system, by simply replacing the light switch with a Brilliant touchscreen panel.
Brilliant Controls include an all-in-one mobile friendly app that provide the end user with complete control of the home or business from anywhere. These Brilliant smart panels can also be installed as secondary controllers with any Resideo ProSeries, VISTA, LYNX and Lyric Controller security system. Brilliant works with Resideo, Honeywell Home, Ring, Google Nest, Sonos, Amazon Alexa, Google Assistant, Apple HomeKit and Siri, Samsung SmartThings, Schlage, Yale, Kwikset, August, Philips Hue, Genie, Overhead Door, Somfy, and many other top smart home brands.
The Brilliant Panels are designed to be installed in place of any standard 1, 2, 3 or 4-gang light switch panel with neutral and ground wires (fits any 1 to 4-gang electrical boxes).
GeoArm has just released the new Alula CAM-DB-JS1 smart video doorbell camera for the DIY home security market.
The Alula CAM-DB-JS1 is an 1080p HD WiFi video doorbell camera that is designed for the Connect+ control panel or BAT-CONNECT universal tri-path alarm communicator. By using the CAM-DB-JS1 camera, customers can get a clear view of their doorstep from virtually anywhere.
With Alula’s Video Doorbell Camera, featuring 1080P HD video and 16 feet of night vision, customers will be able to view real-time footage and recorded clips of activity at their doorstep. It also has two-way audio functionality, enabling interaction with visitors through the Alula Smart Security App or the Slimline Touchpad PRO control interface.
The Video Doorbell can be used as a stand alone video surveillance system or as part of a more holistic security and automation system when paired with Alula’s Connect+ panel or BAT-Connect communicator.
Alarm.com has relaunched their “Geo-Services” to be coined as Alarm.com Places moving forward for smart business and home security.
Starting back in the October 2021, the add-on Alarm.com Places feature was officially renamed and has been available to all GeoArm customers. By upgrading to having Alarm.com Places, the user can add and manage their geo-fenced locations from the mobile app* as well as on the website.
From the website, customers can easily create automation rules and reminders to:
Turn on lights
Open or close garage doors
*Rules can be created only on the customer website.
Users can leverage this cool Alarm.com interactive feature to better control their smart devices from when they first leave to when they return back to the property. This control includes the lights, switches, thermostats, garage openers, and more!
The all-new Alula CAM-OD-JS1-Al is an 1080p HD outdoor bullet security camera has been released at GeoArm.
The CAM-OD-JS1-Al outdoor camera is designed to be used in conjunction with the Connect+ control panel or BAT-CONNECT universal tri-path alarm communicator. Expand your business or home security perimeter with Alula’s Outdoor PoE/WiFi Bullet Camera.
Featuring motion detection and 40 feet of night vision, the Outdoor Bullet Camera provides real-time viewing and recorded clips. Plus with Alula’s Smart Security app you can set up notifications that will alert you when suspicious motion activity is detected. The Outdoor Bullet can be used as a stand alone video surveillance system or as part of a more holistic security and automation system when paired with Alula’s Connect+ panel or BAT-CONNECT communicator.
The Alarm.com ADC-VDBA-CMBUNDLE touchless cover and front door floor mat bundle designed for the Alarm.com ADC-VDB770 video doorbell cameras has been released at GeoArm.
Achieve a 100% touchless front door entrance for all of your guests by pairing this cover and mat bundle with the Alarm.com video doorbell.
Setting up the cover/matt bundle is a breeze. Place the mat on the ground near the front door entrance that is adjacent to the ADC-VDB770 video doorbell. Then, just snap the touchless cover onto the front screen of the ADC-VDB700 video doorbell.