The Honeywell HW-AV-LTE-M Connected Life Safety Services (CLSS) Dual-Path LTE Communicator with dial-capture interface for commercial building fire alarm monitoring has been released on GeoArm.
The HW-AV-LTE-M is a commercial fire dual-path (internet and cellular multi-band AT&T/Verizon LTE) alarm communicator designed for universally compatible fire alarm panels. The CLSS Pathway combines dial capture functionality with the powerful capabilities of Honeywell’s CLSS Cloud. It represents the latest alarm communications technology for the fire industry. The CLSS Pathway allows data transmission by utilizing LTE CAT-M1 networks, serving as a bridge between the fire system and the CLSS Cloud. This device provides a single site-to-cloud path ensuring all CLSS Cloud services use the same audited and monitored method to access the on-premises life safety system.
The CLSS Pathway is commissioned via the CLSS mobile app and CLSS Site Manager interface, which also allow for additional remote visibility. Connection and mounting is simplified using the enclosure kit. The CLSS Pathway is compatible with any fire alarm dialer using Contact ID format and automatically recognizes the format when powered up. Any number can be programmed into the panel phone numbers. Installers can select the central station service they wish to use from a list of approved central station providers.
Equipped with dual SIM cards, the CLSS Pathway supports both AT&T and Verizon networks. When first powered on, the communicator selects the strongest signal. If either path is not available, the device provides redundant paths for the cellular signal. The HW-AV-LTE-M dual-path communicator transmits signals to the AlarmNet Control Center (via the internet or AT&T/Verizon cellular LTE network), which in turn routes signals to the GeoArm central station. If the Internet and AT&T or Verizon LTE networks are all unavailable (fail), the message will not be sent using this HW-AV-LTE-M communicator.
Honeywell CLSS is an innovative, all-in-one cloud platform that enables systems integrators and facilities managers to deliver an enhanced fire safety service, while maximizing the performance efficiencies offered by Honeywell’s trusted detection and alarm systems.
The CLSS platform enables users to;
Universal Panel Compatibility – Dial capture interface supporting Contact ID
Get a “bird’s eye” view of all accounts
Obtain real-time information on event generation, enabling diagnosis before dispatch
Conduct tests and inspections using a mobile app (available in select markets)
Provide end users with multi-site asset information and event alerts
Integration with CLSS enables monitoring of event transmission data & management of device inventory from the CLSS mobile app and web portal (available only when using point-based reporting)
Meets UL 864 requirements for sole primary or backup path communications
High reliability due to multiple transmission channels (LTE CAT-M1/LAN) and redundant servers
Four supervised inputs for non-dialer panels
Unique “M1” Network is 5G ready, providing deep signal penetration that allows operation within buildings
Remote firmware updates
CLSS mobile app supports push and email notifications
Monitors event transmission data & manages device inventory from the CLSS mobile app and web portal
Exceptional Redundancy – Dual-SIM device picks the strongest signal from AT&T or Verizon. If one network becomes unavailable, the communicator connects to the other network
Powered directly by a 24-volt DC fire alarm power supply. No need for additional batteries, transformer, or power supply
Connection monitoring – adjustable fault reporting time as low as 20 seconds
Web-based software and smartphone app for device configuration and administration
The Qolsys IQ4 Hub (from Johnson Controls) all-in-one wireless 7″ touchscreen smart security system with automation has been released to the DIY security marketplace. The affordable IQ4 Hub contains a built-in Alarm.com dual-path wifi/cellular Verizon LTE communicator and either a S-Line/legacy 319.5 MHz wireless receiver, legacy 345 MHz, legacy 433 MHz or PowerG receiver and all the bells and whistles.
The IQ4 Hub also includes other key features such as; Bluetooth, Z-Wave 800-Series automation module, smash and grab reporting. It features a SmartMount system, all internal antennas and an easy on-screen installation wizard. With a built-in front speaker the IQ4 Hub allows for 85dB piezo audible siren to alert nearby individuals of an alarm initiating event. It has a dual panel and wall tamper with spring release and smash and grab reporting. Additionally, the panel has a single wake/sleep button for added user convenience.
The touchscreen panel also includes Live View which is the ability to view Alarm.com video cameras on the screen, and Live Answer. Live Answer give the user the ability to answer their Alarm.com video doorbell from the IQ4 Hub inside the property, such as the Alarm.com ADC-VDB770 touchless video doorbell. Live Answer will also work with Live View cameras that have voice capability, such as the Alarm.com ADC-V515 indoor security camera. With Alarm.com’s video monitoring solutions in place you can view and respond through the interactive app, and you can also see who is at the front door by just looking at the IQ4 Hub touchscreen.
The IQ4 Hub leverages the power of it’s Android 9 operating system with a QualComm Snapdragon 8 core SOM (System on a Module) processor having 16GB NAND Flash internal memory. The IQ4 Hub has an aesthetically pleasing and elegant modern user interface that keeps you connected to an entire ecosystem of smart devices, giving you complete control over your entire apartment, home or small business.
Johnson Control’s Qolsys IQ WiFi 6 (Part Number: IQWF6) mesh router solution for homes and businesses with security, automation and Wi-Fi devices has been released to the do-it-yourself market.
The IQ WiFi 6 is a Wi-Fi Alliance Certified router with Alarm.com management software built in, delivering improved end-to-end user experience and reduced dealer maintenance, support calls and truck rolls.The Qolsys IQWF6 is a mesh capable router that covers every corner of every room with safe, seamless WiFi up to 1,500 square feet per point. The IQ WiFi 6 router is used to connect Qolsys-compatible WiFi devices such as; Alarm.com security cameras, Alarm.com video doorbells and the Qolsys touchscreen keypad inside a home or business to the Qolsys IQ Panel security system.
When paired with the Qolsys IQ Panel, the IQ WiFi 6 delivers 3 unique network/SSIDs: one for the end user’s personal or business devices, an easy-to-join guest network, and a dedicated security network for the dealer’s installed devices such as cameras, doorbells, and garage openers. These networks can be managed and maintained by end users and service providers through the panel’s 7″ touchscreen, iOS and Android mobile apps, and the Alarm.com website and Partner Portal.
IQ WiFi 6 leverages The Qualcomm® Networking Pro 400, a highly flexible Wi-Fi 6 platform designed to meet the growing demands of crowded WiFi environments.
Self optimizing WiFi mesh with wired and wireless ethernet backhaul
The all-new Alarm.com Smart Thermostat HD with color touchscreen display has been released to the DIY security market at GeoArm.
The Alarm.com ADC-T40K-HD is an aesthetically pleasing smart thermostat that offers a sleek, color touchscreen display for an engaging customer experience that delivers the next-level of comfort and control. With mechanical wire detection, an easy setup wizard, and local configuration, the Smart Thermostat HD makes installation a breeze. The Smart Thermostat HD can also monitor the health of the heating and cooling system, deliver monthly performance reports, and even alert you to potential HVAC issues right on its display.
When installing, please keep in mind that the Smart Thermostat HD requires 24 VAC power. There is no option for a battery-powered mode. Power is supplied via a common wire, typically identified as C. Mount on an inside wall, approximately 5 ft. (1.5 m) above the floor in a frequently used room. Avoid areas that are exposed to large temperature variances, such as: direct sunlight, near an AC unit, above or below auxiliary heat and air vents, and drafts from windows or exterior doors.
Easy to use setup wizard
Z-Wave SmartStart and S2 compatible
Full integration with the Alarm.com platform – Scenes, energy-saving schedules, and geo-fences
Optional local scheduling – install in a vacant home prior to account creation
The Brilliant Resideo BHA120USWH all-in-one smart home control panel have just been released for sale at GeoArm.
When adding the Brilliant Control Hub it instantaneously transforms any property, especially those with a Total Connect 2.0 security system, by simply replacing the light switch with a Brilliant touchscreen panel.
Brilliant Controls include an all-in-one mobile friendly app that provide the end user with complete control of the home or business from anywhere. These Brilliant smart panels can also be installed as secondary controllers with any Resideo ProSeries, VISTA, LYNX and Lyric Controller security system. Brilliant works with Resideo, Honeywell Home, Ring, Google Nest, Sonos, Amazon Alexa, Google Assistant, Apple HomeKit and Siri, Samsung SmartThings, Schlage, Yale, Kwikset, August, Philips Hue, Genie, Overhead Door, Somfy, and many other top smart home brands.
The Brilliant Panels are designed to be installed in place of any standard 1, 2, 3 or 4-gang light switch panel with neutral and ground wires (fits any 1 to 4-gang electrical boxes).
The M2M Services MiNi-LTE-M-AV cellular dual-SIM 5G AT&T/Verizon universal alarm communicator with Z-Wave automation for use with most existing burglary intrusion systems is available at GeoArm.
The MINI-LTE-M-AV communicator is compatible with most existing dial-capture interface burglary intrusion control panels (DSC, Honeywell and GE Interlogix NX-Series). With future-proof technology, the MINI-LTE-M-AV communicator transmits alarm signals over the AT&T/Verizon 5G LTE network to the GeoArm central monitoring station.
Likewise, the MINI-LTE-M-AV can be accessed remotely by our GeoArm professional technicians with UDL software (DLS, Compass, DL900) via the RING/TIP connections (using the MN01-RNGR module). So, have peace of mind knowing you are not alone, and this communicator allows for our remote panel programming and full upload/download remote capabilities.
Additionally, the MINI-LTE-M-AV communicator has the ability for end users to remotely control some of the interactive features using the RControl smartphone app (designed for Android/iPhone). Using the app clients can have; remote arm/disarm capabilities, real-time push and email notifications, multiple end users and devices per account, 12 months events history and basic configuration/diagnostics.
In summary, the MINI-LTE-M-AV is an inexpensive option for our DiY clients who have existing security systems and are looking to lower their business or home security bill. This new age M2M Verizon LTE (Long-Term Evolution) communicator, powered by GeoArm, brings faster speeds and greater stability that won’t break the bank.
Universal Panel Compatibility: Dial-Capture Interface supporting Contact ID, SIA and Pulse 4+2
Future-Proof LTE-M Technology: Dual SIM supporting both AT&T and Verizon (or any country specific networks) in the same radio
Interactive Features: Multi brand UDL and smart bus support for selected alarm panels
Forward Compatible with Smart Home: Supporting Z-Wave, Wi-Fi and LAN via the M2M Smart Hub
GeoArm has just released the new Alula CAM-DB-JS1 smart video doorbell camera for the DIY home security market.
The Alula CAM-DB-JS1 is an 1080p HD WiFi video doorbell camera that is designed for the Connect+ control panel or BAT-CONNECT universal tri-path alarm communicator. By using the CAM-DB-JS1 camera, customers can get a clear view of their doorstep from virtually anywhere.
With Alula’s Video Doorbell Camera, featuring 1080P HD video and 16 feet of night vision, customers will be able to view real-time footage and recorded clips of activity at their doorstep. It also has two-way audio functionality, enabling interaction with visitors through the Alula Smart Security App or the Slimline Touchpad PRO control interface.
The Video Doorbell can be used as a stand alone video surveillance system or as part of a more holistic security and automation system when paired with Alula’s Connect+ panel or BAT-Connect communicator.
Alarm.com has relaunched their “Geo-Services” to be coined as Alarm.com Places moving forward for smart business and home security.
Starting back in the October 2021, the add-on Alarm.com Places feature was officially renamed and has been available to all GeoArm customers. By upgrading to having Alarm.com Places, the user can add and manage their geo-fenced locations from the mobile app* as well as on the website.
From the website, customers can easily create automation rules and reminders to:
Turn on lights
Open or close garage doors
*Rules can be created only on the customer website.
Users can leverage this cool Alarm.com interactive feature to better control their smart devices from when they first leave to when they return back to the property. This control includes the lights, switches, thermostats, garage openers, and more!
The all-new Alula CAM-OD-JS1-Al is an 1080p HD outdoor bullet security camera has been released at GeoArm.
The CAM-OD-JS1-Al outdoor camera is designed to be used in conjunction with the Connect+ control panel or BAT-CONNECT universal tri-path alarm communicator. Expand your business or home security perimeter with Alula’s Outdoor PoE/WiFi Bullet Camera.
Featuring motion detection and 40 feet of night vision, the Outdoor Bullet Camera provides real-time viewing and recorded clips. Plus with Alula’s Smart Security app you can set up notifications that will alert you when suspicious motion activity is detected. The Outdoor Bullet can be used as a stand alone video surveillance system or as part of a more holistic security and automation system when paired with Alula’s Connect+ panel or BAT-CONNECT communicator.
The Alarm.com ADC-VDBA-CMBUNDLE touchless cover and front door floor mat bundle designed for the Alarm.com ADC-VDB770 video doorbell cameras has been released at GeoArm.
Achieve a 100% touchless front door entrance for all of your guests by pairing this cover and mat bundle with the Alarm.com video doorbell.
Setting up the cover/matt bundle is a breeze. Place the mat on the ground near the front door entrance that is adjacent to the ADC-VDB770 video doorbell. Then, just snap the touchless cover onto the front screen of the ADC-VDB700 video doorbell.