The Honeywell Lyric Secondary keypad (LKP500-EN) is small in size, which makes it perfect for mounting in those hard-to-fit places. The sleek and stylish product design, allows the keypad to blend into any decor. The installation of the keypad is easy with choices of either wall-mounting or optionally using a Lyric Desk stand kit (LKP500-DK) which is great if you are planning on DIY installing on tabletops, nightstands or kitchen counter. A big benefit of the Lyric Secondary Keypad is its range. Previous 5828/5828v keypads could not be placed further than 50 feet while LKP500-EN has a listed wireless range of 300ft!
The LKP500-EN is the Honeywell wireless secondary keypad that works with systems that work with SiX Series encrypted technology such as the Honeywell Lyric Controller. The Lyric Keypad takes advantage of the 2.4ghz channel which offers full 128-bit encryption to prevent intruders from jamming the RF signals. With the LKP500-EN you also get a keypad that is fully supervised. This means that the Lyric Keypad sends signals back to the alarm control panel every 60 seconds making sure it is still within range. If the Lyric Controller does not receive this signal a supervision loss signal will be sent to our professional alarm monitoring station and if you have Total Connect Services activated with AlarmClub/GeoArm you will receive text and email notifications to your smartphone.
The Lyric Keypad allows you quickly arm/disarm the Honeywell Lyric Security System as well as listen to system status updates with its built-in speaker. One of the greatest benefits of the Lyric LKP500-EN keypad is its panic button features for police, fire, and medical purposes. The Lyric Controller will allow up to 8 LKP500-EN to be programmed at any given time. We recommend adding multiple LKP500-EN wireless Lyric Keypads spread out by the most frequently entered and exited locations such as front doors, garage doors, and master bedrooms.
With the Honeywell LKP500-EN you will have access to its own settings menu where you can adjust features such as turn chime on and off, toggle exit tone/entry tone, voice volume, key level, display brightness, and backlight brightness. To access this area of Lyric Keypad settings simply press and hold select key until menu begins, use the scroll key to the settings, use the select key to choose from desired menu item, use the scroll key to toggle menu options, press select key to save your settings and press cancel at any time to exit Lyric Keypad settings menu. When firmware updates are available for this product you can upgrade the software by manually or remotely by AlarmClub/GeoArm. To upgrade the Lyric LKP500-EN software locally go to the Lyric Controller programming menu select security, tools, enter the master code by default which is 1234, advanced, upgrade sensor firmware. After performing the upgrade command, the keypad displays the upgrade status then, when done, automatically resets twice. Once the Lyric Keypad completes the reset, it will return to normal operation.
Programming the Honeywell LKP500-EN secondary keypad is accomplished through the Lyric Controller installer programming menu. To access this area of programming on the controller you must have your installer code. The Lyric Controller Installer code is 4112. Once you access the installer menu select Program. This area of the Lyric control panel programming is the same area that you would program a Honeywell SiXCT door/window contact, Honeywell SiXPIR motion sensor, Honeywell SiXGB, or a Honeywell SiXSIREN although the programming tactics would vary from device to device.
The Honeywell LKP500-EN product includes:
• Battery pack (7.2VDC) provides 24-hour backup battery power (Included)
• An external 110VAC input/9VDC output power pack and cable (Included)
Honeywell LKP500-EN FAQ’s