The Honeywell Lyric SiXPIR is an encrypted wireless motion sensor with mounting hardware and is intended for use with the Lyric Controller and systems that support’s SiX™ series sensors. The Lyric SiXPIR can be programmed and enrolled into the Honeywell Lyric Controller in a very quickly. Once enrolled, the Lyric SiXPIR sensor cannot be used with another security system until it is removed from the current controller because of its Lyric Lock feature. Each SiXPIR has a unique MAC number located on the sticker on the unit.
The Lyric SiXPIR has a 300-foot transmission range which is around 100 feet more than the previous 5800PIR so now you can place your motion sensor in those far away extra bedrooms from the Lyric Controller. SiXPIR has moved to a 2.4ghz operating frequency which provides you with a 128 bit fully encrypted signal to prevent intruders from jamming the RF signals. The Lyric SiXPIR has expanded its detection with a 40 foot x 56-foot detection pattern which has been designed to protect every size room. The SiXPIR has front and back tamper protection, to prevent anyone from tampering with the enclosure. There are LED indicators on the motion sensor for visual sensor notifications. If you have Total Connect services activated, you can also receive text and email notification anytime this occurs.
The Lyric Motion comes with a Panasonic CR12A Lithium battery that can last for 5 years with normal use. Once the Panasonic battery that comes with the SiXPIR has died you can replace it with One 3V lithium battery. Duracell DL123 and Duracell DL123a, Panasonic CR123A, Honeywell 466.
When installing a Honeywell SiXPIR motion sensor there are a few guidelines you should follow and look at if you are troubleshooting. The Lyric Motion sensor should be installed at a mounting height of 7’6″ either wall or corner mounted and allow a clear line-of-sight to all areas protected. Do not directly face a Lyric SiXPIR towards a window as traffic, window shades, or animals outside can set the motion detector off a cause false alarms. Avoid mounting a SixPIR in close proximity to moving machinery, fluorescent lights, and heating/cooling sources. Lastly, the Lyric SiXPIR is for use with pets no greater than 80lbs. In applications with pets mount the SiXPIR sensor with the center at 7.5 feet and where pets can’t come within 6 feet by climbing on furniture, stairs, or boxes. Before your permanently install a SiXPIR make sure that you run a Go/No Go test and determine if the pet immunity will work with your circumstance.
If possible it is always recommended to have at least one Honeywell SiXPIR motion sensor but, if you can’t use this there are other great options that will help solidify your home or business security system. Try to protect all of your door/windows by using one of the Honeywell SiXCT door/window contacts in the event an intruder opens an entry point and separates the magnet from the contact causing the Lyric Controller alarm to go off. Having door/window contacts is usually the most common method of security but, what if someone breaks into your location by breaking your glass door or window? If this is the case, we always recommend backing up your Lyric SiXCT contacts with a Honeywell SiXGB. The Lyric SiXGB works by detecting all UL listed glass break frequencies and sends the signal directly to the Lyric Controller as an alarm signal. A good combination of these devices will set your house apart from other homes especially when you have AlarmClub’s Alarm Monitoring Service that comes with Signs & Stickers as a deterrent.
The Honeywell Lyric SiXSMOKE has finally been released and is available for shipping within the USA and Canada. The SiXSMOKE was announced at the same time as all of the other SiX Series sensors and where available for ordering but, these sensors were delayed for a few months. The Lyric smoke detector is compatible with the Honeywell Lyric Controller and other systems that can utilize SiX sensor. Once the SiXSMOKE is enrolled into the panel, it cannot be used with another control panel until it has been deleted first because of the Lyric Lock feature. Each Lyric smoke detector has a unique MAC number located on the sticker on the unit.
The wireless SiXSMOKE has a maximum coverage area of 50′ X 50′ and detects smoke/heat in two ways Fixed =135° F Heat Sensing and Rate-of-Rise Sensing of =15° F within 1 minute. One of the coolest features of the Lyric SiXSMOKE, when paired with a Lyric Controller is the fact that if you have more than one detector you can set up the One Go All Go feature which will activate all SiXSMOKE’s if one is triggered. You can place the Lyric SiXSMOKE within 300 feet of the alarm control panel which allows you to install in those back areas. The SiXSMOKE works on a a Direct Sequence, Spread Spectrum (DSSS), two-way radio utilizing the 2.4GHz RF band. In the 2.4GHz band, there are 16 channels available for SiX™. When the device registers with the control panel, it will automatically determine which frequency channel the panel is operating on.
When the SiXSMOKE photoelectric beam detects the presence of smoke, it will go into alarm and send the alarm signal to the Lyric Controller. The Lyric SiXSMOKE works best when you have professional alarm monitoring for your Lyric Security System. Once our central alarm monitoring station receives these signals we can dispatch the exact fire department for your area. During an alarm condition, pressing the detectors test switch will silence the piezoelectric horn for 5 minutes. When programmed in one-go-all-go mode, the detector can only be silenced from the controller. When the battery of the Lyric SiXSMOKE is no longer working you will need to replace it with One 3V lithium battery. Duracell DL123 and DL123A, Panasonic CR123A, Honeywell 466. Remove batteries for at least 10 seconds, before installing new ones.
Note: Do not mix old and new batteries, battery types or manufacturers.
The Honeywell Lyric Security System has added a whole new product line of wireless sensors called SiX Series. The SiX line includes a suite of next-generation devices that include a SiXPIR, SiXCT contact, SiXSMOKE detector, SiXGB, two-way SiXFOB and wireless SiXSIREN with LED indicator lights. SiX devices provide key advantages over the previous Honeywell 5800 devices.
The most popular and important advancement to SiX Sensors is its secure encryption. These devices send their supervised signals back to a supported control panel such as the Honeywell Lyric Controller by introducing secure 128 bit encrypted AES signals for a higher level of security. This is accomplished with direct sequence, spread spectrum DSSS, two-way radio utilizing the 2.4GHz RF band. In the 2.4GHz frequency there are 16 channels available for SiX devices and when it registers with a supported alarm control panel, it will automatically determine which frequency channel the panel is operating on. This creates a fluctuation in the reporting signals which enables the encryption.
SiX devices allow for easier DIY installations and maintenance with its easy pull battery tabs, auto enrollment, and no touch adjustment capabilities. SiX is easier to maintain with its addition of the system health check feature. This feature lets the end users monitor their devices signal strength so they know the location of the sensors is sufficient, battery life so one can prepare themselves to replace batteries before they go into a trouble condition, sensor settings to make self-adjustments to the way sensors react. All of these additions can also be remotely monitored and adjusted by Alarmclub if you are a monitored client.
Lastly, a feature called Lyric Lock has been introduced. Honeywell Lyric Lock works when a SiX device is programmed to a Lyric Controller it can only communicate with that dedicated system until it has been deprogrammed. This is one feature to be cautious about because alarm companies can remotely turn Lyric Lock on to prevent account takeovers by competitors or self-programming. AlarmClub never locks their customers out of the system programming and gives them the option to how they want sensors to be programmed with their systems.
The Honeywell LYNX Touch L5210 wireless security system is the newest system released by Honeywell Security. From factory the Honeywell L5210 comes with an 85db internal siren. Many people seem to think that is not quite loud enough to alert their neighbors. We are providing you with this DIY home and business security video to assist you with the installation of a powered external hardwired siren kit into the Honeywell LYNX Touch L5210 wireless control panel.
We like to use a Honeywell 702 powered outdoor siren but, that doesn’t mean you have to do the same as their are other powered siren options out there. Look for one that also includes a strobe light such as the Amseco SSX-52-s does. The biggest thing to keep in mind when ever deciding on which powered siren to go with is that it does not exceed 1.2 amps as this is the maximum output for the power supply we are using. Some things to keep in mind while installing a powered hardwired siren to the Honeywell L5210 is you will need to run wires from the powered hardwired siren back to the external hardwired kit. Once you have completed installing the powered external siren kit tuck all of the excess beanies back into the box for clean installation.
The part number for the GeoArm powered external hardwired siren kit is SIRENKIT-OD. This kit will include 1 power transformer, 1 sensitive relay, 1 IM 1240 backup battery, a can, and optional 702 siren selection and a power supply. Follow this how to video so that you too can have a very loud Honeywell L5210 wireless security system along with a powered external hardwired alarm siren.